In April 2026, Shuliy Machinery shipped a SL-150 garlic peeling machine and a matching air compressor to a customer in France. The garlic peeling machine was configured for 220V 50Hz single-phase power with a European plug. The air compressor was set up for 380V 50Hz three-phase power. Both machines were tested before shipment. The complete package was ready for immediate production after arrival.
The SL-150 garlic peeling machine processes 100–150 kg of garlic per hour. It uses dry pneumatic peeling technology. The machine is compact at 62 × 63 × 135 cm and weighs 90 kg. It is ideal for small to medium garlic processing businesses in Europe.
Customer Background
The customer operates a garlic processing business in France. They supply peeled garlic to local restaurants, wholesalers, and food manufacturers. Their manual peeling process was slow and labor-intensive. They needed an automated solution to increase output and reduce labor costs.
Customer Challenges
- Labor costs were rising. Manual garlic peeling required 6 workers per shift. The customer wanted to reduce the team to 2 workers.
- Product consistency was poor. Hand-peeled garlic cloves had uneven quality. Some garlic cloves were damaged. Others still had skin attached.
- Power supply was specific. France uses 220V 50Hz single-phase power for small equipment. The customer needed a garlic peeler that matched this standard exactly.
- Space was limited. The production room was small. The machine had to fit in a 70 cm wide corner.
- They needed a complete solution. The dry garlic peeling machine required compressed air. The customer did not have an existing air compressor.
Solution: SL-150 Garlic Peeling Machine with Air Compressor
We recommended the SL-150 garlic peeling machine with a 7.5 kW air compressor. This combination met all customer requirements.
Garlic Peeling Machine Specifications
| Parameter | Specification |
|---|---|
| Model | SL-150 |
| Power | 200 W |
| Voltage | 220V 50Hz Single Phase |
| Capacity | 100–150 kg/h |
| Dimensions | 62 × 63 × 135 cm |
| Weight | 90 kg |
| Peeling Method | Dry Pneumatic |
| Plug Type | European Standard |
Air Compressor Specifications
| Parameter | Specification |
|---|---|
| Power | 7.5 kW |
| Voltage | 380V 50Hz Three Phase |
| Pressure | 0.8 MPa |
| Dimensions | 141 × 50 × 90 cm |
| Weight | 160 kg |
Customization and Factory Testing
Voltage was matched precisely. The garlic peeler motor was configured for 220V 50Hz single-phase. A European plug was installed for direct connection.
The air compressor was wired for 380V 50Hz three-phase. This matches the industrial power supply common in French processing facilities.
Both machines were tested before shipment. We ran 5 kg of garlic through the garlic skin remover machine. Peeling rate reached 97%. Damage rate stayed below 3%.
Air pressure was calibrated to 0.8 MPa. This pressure level is optimal for the SL-150 model. It removes skin without bruising the cloves.
Packaging was reinforced. The garlic peeling machine and air compressor were packed in separate wooden crates. Foam padding protected all surfaces.
Delivery Process
Pre-shipment photos and videos were sent. The customer confirmed machine performance before shipping.
Export documents were prepared. These included a commercial invoice, packing list, and certificate of origin.
Shipping was arranged by sea to France. Transit time was approximately 25 days.
Setup was simple. The customer connected the air compressor to the garlic peeler with the included hose. They plugged both machines into the correct power outlets. Production began the same day.
Customer Feedback After 30 Days
Labor was reduced from 6 workers to 2 workers. The garlic peeling machine now handles the main peeling work.
Daily output increased to 1,000 kg. The customer runs the machine for 8 hours per day. Average capacity is 125 kg/h.
Peeled garlic quality improved. The peeling rate stays at 95–97%. Cloves remain intact. Skin removal is clean.
Energy cost is low. The garlic peeler uses only 200 W. The air compressor runs efficiently at 7.5 kW.
Why Choose Shuliy Machinery?
- 20+ years of machinery export experience. We have shipped to 60+ countries. We understand European voltage and plug standards.
- Full customization included. Voltage, plug type, and capacity are tailored to your market. No hidden fees for basic configuration.
- Factory testing is standard. Every garlic peeling machine is tested with real garlic before shipment. You receive a ready-to-run machine.
- Complete solutions available. We supply not just the peeler, but also air compressors, garlic separators , garlic slicers , and g arlic packing machines .
- One-year warranty and lifetime support. Replacement parts ship quickly. Technical support is available by video call.
